Pulsed, High-Voltage Systems

Downloads: complete product catalog


Rail Gap Switch Systems
    Working Voltages: up to 50 kVDC, typical
    Test Voltage: 70 kVDC
    Current: < 750 kA peak
    Switch, gas controller, bias resistors, electrodes
    Type No. : S/34/65

HV Pulsed Systems and Marx Generators
    Working Voltages: 50 -1,000 kV
    Impedance: 2 -10 Ohm, typical
    Rep. Pulse Rate: 0.1 - 20 Hz
    Risetime: 100 - 1,000 ns

Mini-Marx HV Pulsers
    Voltage: 200 kVDC, designed to specifications
    Energy: 20 Joules
    Pulse Repetition: 5 Hz
    Risetime: 1 μsec
    Pulse Duration: 50 μsec

Compact High Energy Pulsers
    Voltage: 5 - 30 kV
    Current: < 10 kA
    Wired Mains, or Battery
    Pulse Repetition Rate: Hz to 1ppm

Low Cost Trigger Generators
    Input Voltage: 5 - 10 V typical
    Output: 500 V
    Current: 10kA, peak
    Battery or AC mains
    Z/33/146

Pulse Forming Network Pulsers
    Working Voltages: 10-100 kV
    Capacitance: 1 nF - 500 μFd
    Pulse Duration: 10 ns - 100 μs
    Multi-stage system design

Bridge Wire Capacitor Module Trigger
    Input trigger voltage: 0.3 kV
    Output voltage: 3 kV
    Capacitance: 50/100/250nF at 5/10 kV
    Type No.: ZHS/001/101